top of page
Opening your crate (1).png

Thank you for handling this shipment with care.
This crate contains components that may be heavy.
Please follow the steps below to safely open the crate and remove the equipment.

ChatGPT Image Oct 13, 2025, 04_41_48 PM.png

01

Step 1: Prepare the Area

  • Place the crate on a flat, stable surface.

  • Make sure you have enough space around you.

ChatGPT Image Oct 13, 2025, 04_35_01 PM.png

02

Step 2: Assess the Crate

  • Identify the top and front sides.

  • If damage is visible, take photos **before opening** and report it.

ChatGPT Image Oct 13, 2025, 04_35_46 PM.png

03

Step 3: Remove the Top (if needed)

  • Use a pry bar to loosen and remove the top panel.

  • Work carefully to avoid splintering.

ChatGPT Image Oct 13, 2025, 04_43_52 PM.png

04

Step 4: Open the Front or Side

  • Pry open the front or side panel next.

  • Work from top to bottom, removing nails along the way.

ChatGPT Image Oct 13, 2025, 04_45_25 PM.png

05

Step 5: Support the Part

  • Before pulling it out, make sure the component is stable.

  • Have someone support it if it starts to lean.

ChatGPT Image Oct 13, 2025, 04_46_01 PM.png

06

Step 6: Remove Restraints

  • If strapped or bolted inside, cut straps or unfasten bolts.

WeCrate Companion Label .png
ChatGPT Image Oct 13, 2025, 05_00_13 PM.png

📐 SAFETY FIRST


Important Safety Notes:

  • ⚠️ The component inside may be top-heavy — it can tip if not supported properly.

  • 🧤 Wear gloves, safety glasses, and safety shoes.

  • 🪓 The crate is nailed shut — tools will be required.

  • 👥 Work with at least two people, if possible.

  • 🚫 Do not rush — take your time to avoid damage or injury.

🧰 WHAT YOU’LL NEED

  • Pry bar or nail puller

  • Hammer

  • Gloves & glasses

  • Two or more people

  • Straps or support for tall panels (optional)

🚫 WHAT NOT TO DO

  • ❌ Don’t drop the pump or let it fall.

  • ❌ Don’t stand directly in front of an unstable part.

  • ❌ Don’t open the crate without PPE.

💡 Extra Tips:

  • 🔎 Inspect the crate first: Check for damage or instability before opening.

  • 🪵 Secure the crate: Make sure it won’t shift while you work.

  • 📋 Plan ahead: Have a clear space ready for the panel once it’s out.

  • 💡 Good lighting: Work in a well-lit area to see clearly.

  • ✋ Mind your hands: Don’t place fingers under boards or near nails.

  • 🪛 Loose parts inside: Look for extra items (manuals, bolts) before moving the panel.

  • 👥 Teamwork helps: Use two or more people for tall or heavy panels.

  • ♻️ Recycle timber: Stack boards and nails safely, recycle if possible.

  • 📷 Take photos: Document the crate and contents before and after opening.

  • 🪓 Nails: Hammer down or remove any exposed nails to prevent injury.

📞 NEED HELP?


If you need assistance:

bottom of page