top of page
qt=q_95.webp

UNPACKING INSTRUCTIONS

Thank you for handling our shipment with care.
This crate contains electrical panels that may be tall and top-heavy.
Please follow the steps below to safely open the crate and remove the equipment.

How To Open Your Crates

01

Step 1: Prepare the Area

  • Place the crate on a flat, stable surface.

  • Make sure you have enough space around you.

02

Step 2: Assess the Crate

  • Identify the top and front sides.

  • Look for arrows or markings indicating the correct side.

03

Step 3: Remove the Top (if needed)

  • Use a pry bar to loosen and remove the top panel.

  • Work carefully to avoid splintering.

04

Step 4: Open the Front or Side

  • Pry open the front or side panel next.

  • Work from top to bottom, removing nails along the way.

05

Step 5: Support the Panel

  • Before pulling it out, make sure the panel is stable.

  • Have someone hold it upright if it starts to lean.

06

Step 6: Remove Restraints

  • If strapped or bolted inside, cut straps or unfasten bolts.

📐 SAFETY FIRST


Important Safety Notes:

  • ⚠️ The panel inside may be top-heavy — it can tip if not supported properly.

  • 🧤 Wear gloves, safety glasses, and safety shoes.

  • 🪓 The crate is nailed shut — tools will be required.

  • 👥 Work with at least two people, if possible.

  • 🚫 Do not rush — take your time to avoid damage or injury.

🧰 WHAT YOU’LL NEED

​

  • Pry bar or nail puller

  • Hammer

  • Gloves & glasses

  • Two or more people

  • Straps or support for tall panels (optional)

🚫 WHAT NOT TO DO

​

  • ❌ Don’t drop the panel or let it fall.

​

  • ❌ Don’t stand directly in front of an unstable panel.

​

  • ❌ Don’t open the crate without PPE.

📞 NEED HELP?


If you need assistance:

PNG instructions (300 x 300 mm) (1).png

💡 Extra Tips:

  • 🔎 Inspect the crate first: Check for damage or instability before opening.

  • 🪵 Secure the crate: Make sure it won’t shift while you work.

  • 📋 Plan ahead: Have a clear space ready for the panel once it’s out.

  • 💡 Good lighting: Work in a well-lit area to see clearly.

  • ✋ Mind your hands: Don’t place fingers under boards or near nails.

  • 🪛 Loose parts inside: Look for extra items (manuals, bolts) before moving the panel.

  • 👥 Teamwork helps: Use two or more people for tall or heavy panels.

  • ♻️ Recycle timber: Stack boards and nails safely, recycle if possible.

  • 📷 Take photos: Document the crate and contents before and after opening.

  • 🪓 Nails: Hammer down or remove any exposed nails to prevent injury.

bottom of page